Classé par  
Radial Engineering  CUBE   (R700 01...
399.00$ CAD   
Workhorse - Cube
Part No. R700 0107 00


Desktop power rack houses three 500 series modules
Compatible with Radial and older API systems
Provides up to 500 milliamps of shared current
Optional angles let you recess it into the table top



The Cube™ is a three module desktop power rack designed to bring the fun and excitement of 500 series modular audio to everyone!

Unlike other 500 series enclosures that are usually rack mounted, The Cube™ is designed to sit on the desktop or be carried around the studio using the convenient top-mounted handle. This enables the engineer to position instrument and microphone preamps as close to the source as possible for improved signal to noise. The Cube can also be recessed into the work surface us...
 
Radial Engineering  CUBE-AM   (R700...
29.00$ CAD   
Angle mount adaptor for Cube
 
Radial Engineering  CUBE-FM   (R700...
29.00$ CAD   
Flush mount adaptor for Cube
 
Radial Engineering  EXTC-500   (R70...
329.00$ CAD   
Effects loop interface connects guitar pedals to the recording system
 
Radial Engineering  JDV-Pre   (R700...
499.00$ CAD   
The Radial JDV Mk3 is arguably the most advanced and sonically superior direct box made today. With 100% class-A circuit and a 30-Volt internal rail voltage, the JDV combines exceptional sonic quality and unmatched dynamic handling for the most natural and uncolored sound possible.

Designed as a creative tool, the JDV introduces a concept of 'Zones' with choice of two inputs, four instrument amplifier outputs, and a unity-gain transformerless output.

Features include Drag control for precise pickup load correction, 3.9 meg-ohm input impedance for piezo pickups, hi-pass and lo-pass filters, full LED status indicators, polarity reverse and all of the other features one would expect from a Radial DI.

The Radial JDV Mk3 is designed for use in both the studio and live...
 
Radial Engineering  PhazeQ   (R700-...
329.00$ CAD   
The Radial PhazerT is a line level phase alignment tool that lets you bring two sound sources together so that the fundamentals play in sync. Once in phase, the results are impressive: On electric guitar; you can combine the direct feed of an amp with a room mic to create fat rich tones. On a kick drum, combine the 'attack' sound from a batter head mic with the 'boom' captured by a resonant head mic. On a snare drum, combine the top and bottom mics and on acoustic instruments, combine a close 'spot' mic with a room mic to capture textures like never before.

The Phazer is designed from the ground up for optimum sound quality and features 100% discreet class-A circuitry. This results in smooth and natural sounding phase curves which are particularly important in the lower frequency ...
 
Radial Engineering  Powerhouse   (R...
949.99$ CAD   
Workhorse - Powerhouse
Part No. R700 0104 00


10-slot design for maximum density
Individual XLR & ¼" TRS i/o on each slot
Easy-Glide module alignment tray
Innovative feed and link functions

The Powerhouse is a 10 module 500 series power-rack designed to accommodate both older and newer 500 series modules and provide the studio with maximum density in a standard 19" rack frame.

The design begins with heavy 14 gauge steel construction and durable powder coat finish for maximum shielding against noise and greater durability when subjected to road use. An 'easy glide' slider tray makes it painless to align the PCB connector to the 15 pin card edge receptacle when swapping modules. Once connected, the rear panel sports a standard array of XLRs ...
 
Radial Engineering  PowerPre   (R70...
579.00$ CAD   
Radial PowerPre? Mic Preamplifier
Part no. R700 0110


Hand selected 100% discrete electronics
Hammond broadcast transformer output
AccuState? low-noise input circuit
3-position Vox control for added air or punch

The Radial PowerPre? is a high performance microphone preamplifier designed to be used with the Radial Workhorse and other 500 series modular racks. It features 100% discrete components for optimal signal transfer and employs a 'vintage' Hammond broadcast output transformer for warmth and exceptionally smooth tone.

The design begins with a front mounted XLR for instant connectivity plus a recessed 48V phantom power switch for safety. Unlike most mic preamps that require careful gain adjustment to avoid troublesome noise, the PowerP...
 
Radial Engineering  Powerstrip   (R...
399.00$ CAD   
PowerStrip 500 Series 3-Slot Power Rack
Part No. R700 0105 00


Single RU power rack houses three 500 series modules
Designed to create the ultimate input strip
Compatible with Radial and older API systems
Provides up to 500 mA of shared current

The PowerStrip™ is a three module rackmount power supply designed to bring the fun and excitement of 500 series modular audio to everyone!

Unlike other single space power racks that are limited to two modules, the innovative triple-module design allows you to put together a traditional channel strip, combining a mic preamp with an equalizer and dynamic control using a compressor-limiter all within the confines of a single RU 19" rack. With so many choices of modules available today, this opens the ...
 
Radial Engineering  PowerTube   (R7...
789.00$ CAD   
Radial PowerTube? Tube Preamplifier
Part no. R700 0115


High voltage 12AX7 tube drive with 60dB of gain
Smooth sounding Jensen Transformer input
Hand inserted 100% discrete class-A electronics
Single wide module fits all 500 series rack formats

The Radial PowerTube is an 'old school' 100% discrete class-A vacuum tube microphone amplifier intended to capture the essence of the voice or instrument while adding the rich harmonics, warmth, and character of a transformer coupled tube circuit.

Designed to fit inside the Radial Workhorse and other 500 series racks, the 'single-wide' PowerTube begins with an ultra low-noise Jensen input transformer. This exhibits near perfect frequency response while producing the warm Bessel curve Jensen is lege...
 
Radial Engineering  SixPack   (R700...
529.99$ CAD   
Workhorse - SixPack
Part No. R700 0108 00


Portable 6 slot power rack with carry handle
Perfect for stereo channels or as a studio side car
Powerful 1600 milliamp supply will not sag when loaded
Workstation ready with front panel convenience XLRs

The SixPack is a desk-top power rack for 500 series modules that lets you mix and match up to six modules and safely power them to create a stereo channel strip or unique signal chain.

The design begins with a heavy 14 gauge steel construction and durable powder coat finish. This provides extra durability when moving the SixPack around the studio while also providing better shielding against stray magnetic fields. To reduce induced noise, the power supply is external and connects using a 5-pin lo...
 
Radial Engineering  Tank Driver   (...
329.00$ CAD   
Pro-balanced spring reverb interface
Use the spring reverb in your guitar amp
Add unique spring reverb effects to recordings
Optimized drive circuit for low noise
 
Radial Engineering  Workhorse   (R7...
1449.99$ CAD   
500 series 8 slot rack with 8x2 summing mixer
Bulletproof design is backwards compatible
Plenty of current for power hungry modules
Dual output headphone buss for monitoring

The Radial Workhorse is a modular rack and mixer that combines the popular 500 series platform with an incredibly flexible patching system to let you create the ultimate studio environment.

Equipped to handle up to eight modules, the Workhorse lets you mix and match preamps, EQs and compressors and bring them all together in one rack. Individual modules may be accessed on the rear panel following the traditional API™ format or bussed to the built-in 8x2 summing mixer for left-right signal panning, level control and muting. Once mounted, a unique 'feed' functon lets you configure modules...
 
Radial Engineering  WR8 Rack   (R70...
799.99$ CAD   
WR-8 Workhorse 8-Slot Power Rack
Part No. R700 0101 00


500 series power rack with room for 8 modules
Upgrades to full Workhorse with optional mixer
100% compatible with older API type racks
Over 20% more current than the original spec

The Workhorse WR-8 is a trimmed down version of the Tec Award winning Workhorse power rack without the 8 channel summing mixer. This enables those that may not need a mixer to join in the fun while leaving the door open to upgrade in the future.

Like the Workhorse, the WR8 features eight slots to accommodate both Radial modules and other API Lunchbox™ compatible modules. An innovative slide-in tray makes loading modules easy! Rear connections include XLR and ¼" TRS inputs and outputs plus parallel connectio...
 
Radial Engineering  X-AMP-500   (R7...
329.00$ CAD   
The Radial X-Amp is an active re-amping device that presents the engineer / producer with a new and innovative creative tool that allows a pre-recorded track from a line level device to drive two guitar amplifiers or effect pedals simultaneously. This opens the door to explore new musical sounds and spur on the creative process.

Following the critically acclaimed Radial JD7 Injector, the X-Amp employs a unique Class-A circuit design that has been optimized for use with guitars. Using the X-Amp is easy: One would, for instance, record a dry track using a high quality direct box, then send this track from the recorder to the X-Amp and then to either guitar amps, effect pedals or combinations thereof.

Recording using the X-Amp has many benefits: Once the basic track has been...
 
1