Sous-Catégories



Classé par  
ROLLS  MM11   (MM11)
App 514-721-1518   
Mic Mute
The MM11 MicMute is a simple device designed to temporarily mute a balanced XLR signal and will pass phantom power. Simply press the switch for muting, and release to hear the signal again. Used primarily for muting microphones, the MM11 has a large actuator switch which may be used by hand as well as foot.
 
ROLLS  MS111   (MS111)
App 514-721-1518   
Mic Switch On/Off
The ROLLS MS111 is a general purpose muting switch for microphones and will pass phantom power. It is configurable to be Push to Mute, Release to Mute, Push ON and Push OFF maintained contact. It is the only switch of this kind we know of and is the result of many requests for variations of our popular MM11 that is push to mute only. The MS111 is configured by a switch accessed on the side that will reverse the action in momentary mode and by moving a wire on the main switch to the side for momentary. Or the center for maintained action. If a particular configuration is desired they may be ordered that way from the factory. Otherwise button down latching is the default from the factory.
 
ROLLS  MSC106   (MSC106)
App 514-721-1518   
Mic Stand Clamp for Accessories
The MSC106 is a stand bracket with tension adjustment screw - designed for attachment to any Rolls Accessory such as a PM50s, PM351, HA43 Pro, etc. It's made of thick steel for strength, and has two holes through which the screws attach to the back of the accessory product. The bracket may be easily mounted to microphone stands, music stands, etc., for convenient operation of the attached accessory.
 
ROLLS  PB223   (PB223)
App 514-721-1518   
2 CH Phantom power Adapter
The PB223 is for powering phantom powered microphones with 48VDC. Since the unit uses a 100KHz switching power supply there is no audio noise generated. The PB223 has output pull down resistors so it will work with any mixer. The PB223 is identical to the PB23, except it powers two microphones rather than one.
 
ROLLS  PB224   (PB224)
App 514-721-1518   
Dual Battery Powered Phantom Adapter
Perfect for any condenser microphone, the new PB224 powers even the high-current draw microphones. The unit features a complete redesign in the voltage supply circuits, offering a rock solid 48 volts of clean phantom power. The 224 now sports a vastly improved molded plastic battery compartment for the two 9 Volt alkaline batteries, however it will still operate on the Rolls PS27 AC adapter.
 
ROLLS  PB23   (PB23)
App 514-721-1518   
Single-channel Phantom Power Adapter
The PB23 is for powering phantom powered microphones with 48VDC. Since the unit uses a 100KHz switching power supply there is no audio noise generated. It has an output pull down resistors so it will work with any mixer.
 
1