Classé par  
Radial Engineering  BigShot ABY   (...
99.99$ CAD   
True-bypass ABY amp selector with tuner out
On-board transformer to eliminate hum & buzz
180° polarity reverse to phase-match amps
100% passive, does not require a battery or power
The Radial BigShot ABY is a compact ABY switcher than enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time.
Designed for the purist, this true-bypass ABY switcher is completely passive meaning that there are no tone altering buffers in between the guitar and the amplifier. With the BigShot ABY, you get the pure tone from your guitar plugged direct into your amp! To add versatility, the BigShot ABY is also equipped with a separate tuner out. This 'always on' output feeds your tuner for constant monitoring while keeping it o...
 
Radial Engineering  Direct-Drive   ...
Nouveauté 199.99$ CAD   
Guitar amp simulator with 3 amp settings and balanced DI out*
 
Radial Engineering  EXTC SA   (R800...
299.99$ CAD   
Balanced interface for guitar effects pedals
Separate send & receive controls optimize signal path
Transformer isolation helps eliminate ground loops
Creative tool helps your mix stand out from the rest

The Radial EXTC-SA? is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine? add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin?The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.

And it's super easy to use: connect a line level signal from the recording system. The EXTC-SA unbalances the signal and converts it to high impedance where guitar pedals can ...
 
Radial Engineering  Headload
999.99$ CAD   
Combination speaker attenuator and simulator
Safely handles up to 130 watts RMS (180 peak)
Radial JDX Reactor and Phazer for direct recording
Delivers great tone from your amp at low volume

The Headload is a combination load box and attenuator that is capable of handling up to 130 watts RMS of continuous power and peaks of 180 watts. Inserted between the head and cabinet, it allows the guitar amp to be driven hard while reducing the output level to reduce the sound pressure on stage or provide the means for quiet recording in the studio. This enables the artist to optimize the tone from the guitar amplifier without having to perform at ear-blistering levels.

The 100% discrete fan-cooled design begins with a series of cement encrusted, epoxy coated copper res...
 
Radial Engineering  Hot British   (...
239.99$ CAD   
Tube distortion
 
Radial Engineering  HotShotT ABi line input s...
99.99$ CAD   
The HotShot ABi is a balanced signal source selector that allows the user to instantly select between two signal sources by depressing a latching footswitch. As it is completely passive, powering is not required to make it work.
 
Radial Engineering  HotShotT ABo line ouput s...
99.99$ CAD   
The HotShot ABo is a balanced signal output selector that employs a latching switch to allow one to connect a sound source to a choice of two destinations. The HotShot ABo is completely passive and therefore does not require powering of any type to make it work.

The HotShot ABo can be used in a variety of applications including driving two channels on a mixing console for dry and wet effects routing; to divert a mic from the PA system to the monitors or intercom; for temporarily muting the signal such as when coughing; and for talkback mic control.
 
Radial Engineering  JD7   (R800 700...
1249.99$ CAD   
Drive up to 7 amps and effects at the same time
100% discrete class-A buffers with Jensen Transformer isolation
Built-in Radial DI with multi-out Reamping™ capabilities
Drag control load correction for natural sound

Radial JD6 Six-Channel Rackmount DI

The Radial JD7 Injector is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time and do so without the noise that often plagues most systems.

It features A or B selectable inputs with Radial's award winning class-A buffering circuit for ultra low distortion. To ensure maximum signal fidelity, Drag Control™ load correction lets you replicate the load on the guitar pickup as if connected to a tube amplifier for the most natural tone. The hi-Z outputs are equipped w...
 
Radial Engineering  JDX-48   (R800 ...
199.99$ CAD   
Captures sound of both the head and the cabinet
Delivers consistent tone - show after show
Works equally well on electric guitar and bass
Can be used with 48V phantom power or DC supply

The Radial JDX 48 Reactor is a direct box designed to capture the explosive dynamics and warmth of an electric guitar amplifier by connecting between the guitar amp head and speaker cabinet. This delivers a sound that is similar to a well-placed microphone while eliminating the frustrating inconsistencies.

The design begins with 100% discrete class-A circuitry and a transformer-coupled 'reactive load' that captures both the sound from the amp head along with the back electromagnetic impulse from the loudspeaker. This produces a more realistic rendering than the usual resist...
 
Radial Engineering  JX42   (R800 65...
379.99$ CAD   
Selects up to 4 guitars and 2 amps
Ultra quiet opto-resistive switching
Transformer isolated - eliminates hum
Optional JR2 & JR5 remote control footswitches

The Radial JX-42 is a compact guitar and amp switcher made to handle up to four guitars and two amps simultaneously.

Designed for concert touring, the JX-42 begins with four radio-style switches that immediately turn the previous channel off when the new channel is selected. These are complimented with easy-to-see LEDs for visual feedback on dark stages. To ensure the quietest switching possible, opto-resistive couplers are employed that ramp up and down the signal, eliminating any popping that could otherwise occur. This is particularly important when using the JX-42 with high gain amps. Connecting the...
 
Radial Engineering  JX44   (R800 65...
1599.99$ CAD   
Control as many as 4 guitars and 6 amps at once
Programmable with remote control for pedalboard
Built in Radial DI box, SGI line driver and X-Amp
Transformer isolated to eliminate ground loops

The Radial JX44 Air Control is a guitar signal manager designed for the most demanding professional concert stages where wireless guitar systems, acoustics, effects and multiple amplifiers are used simultaneously.

To ensure the highest quality signal transfer, the four instrument inputs employ Radial's unique class-A buffering with 100% discrete components throughout. Inputs A & B are equipped with Drag™ Control load correction that lets you 'dial in' the perfect load on the pickup for the most natural tone. Inputs B &C are equipped with a trim level that let you quic...
 
Radial Engineering  JX62   (R800 65...
999.99$ CAD   
Select between 6 guitars and 2 amps
100% discrete, class-A buffers for best sound
PFL and headphone amp for system checks
2 built-in Radial DI boxes for acoustic guitars

The Radial JX62 is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and buzz caused by ground loops.

Housed in a 1 RU, 19" rack enclosure, the JX62 begins with 6 input channels, all of which are equipped with ¼" input and separate thru for a dedicated amplifier plus a trim control to balance the signal levels. Channels 1 and 2 are supplemented with Drag™ Control load cor...
 
Radial Engineering  Phaser   (R800 ...
339.00$ CAD   
Time align two signals for exceptional clarity
100% analogue, does not 'step' like digital delay
Low-pass filter lets you focus the effect
Once you try it, you will never mix without
The Radial PhazerT is an analogue phase alignment tool that lets you bring two sound sources together so that the fundamentals play in sync. Once in phase, the results are impressive: On electric guitar; you can combine the direct feed of an amp with a room mic to create fat rich tones. On a kick drum, combine the 'attack' sound from a batter head mic with the 'boom' captured by the outer shell mic. On a snare drum, combine the top and bottom mics and on acoustic instruments, combine a close 'spot' mic with a room mic to capture textures like never before.
The Phazer is designed from the ...
 
Radial Engineering  Prodigy V8
449.00$ CAD   
Load box with 100%, 50% and silent attenuation
Let's you drive your amp hard for best tone
JDX Reactor direct output for PA and monitors
Built-in headphone amp for practicing

The Headload Prodigy™ is a combination load box and DI that lets you drive your guitar amp at a higher output in order to maximize the tone, yet produce a lower stage volume when needed.

Like the larger Headload™, the Prodigy employs custom made cement-encrusted ceramic-coated resister coils to convert the excessive power from the amplifier to heat and is able to comfortably withstand up to 100 watts RMS. The Prodigy may be used in three different ways, depending on the need: First, it may be used as a direct box via the built-in Radial JDX Reactor. The hugely popular JDX combines a re...
 
Radial Engineering  ProRMP   (R800 ...
99.99$ CAD   
Play pre-recorded tracks through amps and pedals
On board level control for fine tuning amp level
Transformer isolated to eliminate buzz and hum
Opens the door to creative new tones and textures

For years, Reamping has been the 'secret weapon' for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums and even voice as a means to bring creative new tones and sonic signatures to their music.

Reamping has many benefits. You start by recording a clean track and concentrate on capturing the best musical performance. Once the magic has been captured, send the clean track back to the amps and effects and adjust the sound to suit. No more hours of repetition for...
 
Radial Engineering  Reamp JCR   (R8...
199.99$ CAD   
Lets you re-record tracks through a guitar or bass amp
Original Reamp circuit designed by John Cuniberti
Plug and play easy to use passive design
Improves productivity while expanding creative options

The Reamp® JCR™ is a passive Reamper™ that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.

The Radial Reamp JCR is...
 
Radial Engineering  Reamp® JCRT Studio Reampe...
199.00$ CAD   
The Reamp® JCRT is a passive ReamperT that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.
The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version ...
 
Radial Engineering  SB-15 Tailbone  ...
89.00$ CAD   
100% discrete Class-A buffer
Drag™ control load correction
Drives pedals to 15 meters (50')
Converts two 9V supplies to 15 VDC

The Radial SB-15 Tailbone is a high performance signal buffer designed to sit at the beginning of the signal chain and drive multiple pedals without the added noise that often plagues high impedance circuits.

The ultra-compact design begins with a standard Hi-Z instrument input. The signal is then 'tamed' using Radial's unique Dragster™ load correction circuit to replicate the tone and feel as if connected directly to the amplifier. The signal is then buffered via a 100% discrete, class-A unity gain amplifier. Unlike most others that employ ICs or integrated circuits to buffer the signal, the discrete design reduces the need for ph...
 
Radial Engineering  SB-6 Isolator  ...
99.00$ CAD   
Isolator for balanced and unbalanced signals
Eliminates hum and buzz caused by ground loops
Exceptionally linear from 20Hz to 20kHz
Automatically configures for hi-Z or lo-Z signal chains

The Radial StageBug® SB-6 is a high performance 2-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and work effectively at eliminating noise when used with instruments, consumer electronics as well as professional line-level devices.

The design begins with ¼" TRS inputs and outputs to accommodate both TRS and mono type connectors. The unique circuit retains the balanced signals or automatically converts them from hi-Z to lo-Z (¼" mono to TRS) or lo-Z to hi-Z (1/4"TRS to mono) depending on the connector in use. You simply connect a...
 
Radial Engineering  SGI   (R800 160...
279.99$ CAD   
SGI™ Studio Guitar Interface System

Balanced line driver for guitars and bass
Send signal over 100 meters (300 feet) without loss
100% discrete class-A with Drag Control™
Delivers pure sound without artefact

The Radial SGI is a high performance line driver that takes an unbalanced guitar signal and allows you to drive it as far as 100 meters (300ft) without noise. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers.

The SGI consists of two boxes: the SGI-TX transmitter and the SGI-RX receiver. The connection between the...
 
Radial Engineering  SGI44   (R800 6...
379.99$ CAD   
Bidirectional long-distance 'send & receive' effects router
Drive guitar & bass signals beyond 100 meters
100% discrete class-A circuitry
Works with the Radial JX44 guitar & amp selector

The Radial SGI-44 is a studio quality bidirectional effects router that designed to take the output from a wireless receiver and run the guitar signal to the pedalboard and back. Two SGI-44s are used with one positioned at the wireless end, the other at the pedalboard. Connection is made using standard XLR cables.

The first SGI-44 converts the unbalanced high-impedance guitar signal to a balanced low-impedance signal and the second reverses the process - thus allowing distances of more than 100 meters (300') without noise. To ensure optimal signal quality, the SGI-44 employ...
 
Radial Engineering  StageDirect   (...
229.99$ CAD   
Active DI with footswitch mute & tuner out
Silently switch instruments on stage without noise
Eliminates feedback when instrument is not in use
Remote control lets stage tech perform switching

The Radial StageDirect is a state-of-the-art active direct box designed for musicians who require extra control when they are on stage. As with most DIs, the StageDirect is equipped with a hi-Z input for the instrument, a thru-put for the stage amplifier and a balanced low-Z output for the PA system. The 'extra' comes by way of a dedicated tuner output and footswitch that mutes the signal going to the PA and stage amplifier while leaving the tuner output active. This enables the artist to mute the guitar when not in use or quietly tune in between songs.

The innovative...
 
Radial Engineering  ToneBone Classic &nb...
239.00$ CAD   
12AX7 tube for natural overdrive tone
True bypass clean mode
Powerful EQ for wide tonal range

Ultra low-noise - amazing dynamics and feel
Cleans up like a tube amp when guitar turned down

The Tonebone Classic is a 12AX7 tube equipped true-bypass distortion that has been optimized for flexibility and tonal range.

Following the vision set by Leo Fender in the 1950's, the Classic is based on vintage overdrive sounds that started in the '60s and '70s and today remain some of the most sought after tones. With three drive settings, variable drive control and powerful EQ, the Classic lets you dial in the slight overdrive to high-gain saturation and everything in between.

And like a real tube amp, when you turn your guitar volume down, the Classi...
 
Radial Engineering  TwinLine   (R80...
379.99$ CAD   
Shares your pedalboard between two amp loops
Lets you optimise the signal path for each amp
Works with pedals or balanced studio processors
Can be remotely controlled using a footswitch

The Radial Twinline™ is a unique device that enables a guitarist to share effects pedals between two amps when using the amplifier's built-in (rear-panel) effects loops.

Consider the problem: Many guitarists prefer to use the effects loop in the amplifier to insert pedals into their signal chain. This is particularly useful with delay pedals where applying echo to the signal after the guitar amp's preamp distortion as this results in more distinctive notes and more pleasing sonic results. A problem arises when using two amps on stage: how do you toggle the pedalboard between...
 
Radial Engineering  Voco-Loco   (R8...
299.99$ CAD   
Add guitar effects pedals to vocals or instruments
Create exciting and unique effects as you perform
Turn on multiple effects using one footswitch
Works with either dynamic or condenser microphones

The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing.

The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer is...
 
1